Wie alle SWANS-Komponenten sind auch die Lautsprecher der VA-Serie für bestmögliche Klangperformance entwickelt worden. Robuste, resonanzarme und UV-Licht-beständige Dura-ABS-Gehäuse sorgen auch im Aussenbereich für entsprechende Langzeitstabilität. Die Gitter und Halterungen bestehen aus wetterfestem, beschichteten Aluminium. Es wird ausschließlich rostfreier Stahl verwendet. Lediglich bei den Hochtönern mußten Swans-untypisch Kompromisse gemacht werden. Hier werden wegen der Wetterbeständigkeit ferrofluidgekühlte 25mm Leichtmetallkalotten eingesetzt.

VA4-OS 4” 2-way Indoor/Outdoor Speaker

Woofer: 4 ” Aluminum cone, rubber surround, 18.5oz Magnet, 1" voice coil, bumped back plate, vented pole piece
Tweeter: 25mm Aluminum dome, Ferro-fluid cooled, Ferrite magnet, wide dispersion
Crossover: Phonalic PCB board, 6dB woofer section, 12dB tweeter section, Polymide auto protective switch for tweeter
Frequency Response: 65Hz- 20KHz
Sensitivity: 86dB
Recommended amplifier power: 10-60 watts
Impedance: 8 ohm
Size: H279mm B171mm T170mm (incl.Wallmount)

VA5-OS 5.25” 2-way Indoor/Outdoor Speaker

Woofer: 5.25” Aluminum cone, rubber surround, 18.5oz Magnet, 1" voice coil, bumped back plate
Tweeter: 25mm Aluminum dome, Ferro-fluid cooled, Ferrite magnet, wide dispersion
Crossover: Phonalic PCB board, 6dB woofer section, 12dB tweeter section, Polymide auto protective switch for tweeter
Frequency Response: 60Hz- 20KHz
Sensitivity: 87dB
Recommended amplifier power: 10-80 watts
Impedance: 8 ohm
Size: H298mm B184mm T184mm (incl. Wallmount)

VA6-OS 6.5” 2-way Indoor/Outdoor Speaker

Woofer: 6.5” Aluminum cone, rubber surround, 18.5oz Magnet, 1" voice coil, bumped back plate
Tweeter: 25mm Aluminum dome, Ferro-fluid cooled, Ferrite magnet, wide dispersion
Crossover: Phonalic PCB board, 6dB woofer section, 12dB tweeter section, Polymide auto protective switch for tweeter
Frequency Response: 50Hz- 20KHz
Sensitivity: 88dB
Recommended amplifier power: 10-125 watts
Impedance: 8 ohm
Size: H337mm B215mm T219mm (incl. Wallmount)

VA8-OS 8” 2-way Indoor/Outdoor Speaker

Woofer: 8 ” Aluminum cone, rubber surround, 21.8oz Magnet, 1.5" voice coil, bumped back plate
Tweeter: 25mm Aluminum dome, Ferro-fluid cooled, Ferrite magnet, wide dispersion
Crossover: Phonalic PCB board, 6dB woofer section, 12dB tweeter section, Polymide auto protective switch for tweeter
Frequency Response: 40Hz- 20KHz
Sensitivity: 87dB
Recommended amplifier power: 10-150 watts
Impedance: 8 ohm
Size: H449mm B289mm T277mm (incl. Wallmount)